Home » Topics » Physical Design » Physical Design: Kiến thức cơ bản

Physical Design: Kiến thức cơ bản

Viewing 1 reply thread
  • Author
    Posts
    • #571
      Vinh P. Nguyen
      Moderator
      • Topics : 3
      • Contributions : 10
      • Senior Contributor
      • ★★★
      Up
      2
      Down
      ::

      * Phần 1: Dành cho các bạn sinh viên, học viên.

      Vì có sự khác nhau trong việc thiết kế chương trình đại học và sau đại học, một số môn học được truyền tải với tên gọi khác nhau, tôi tạm liệt kê các môn học và kiến thức cơ bản cần để các bạn sinh viên học theo mảng Physical Design.

      1. Basic Linux

      2. Basic Programing, Scripting Language

      3. CMOS Fundamentals

      4. Wafer Fabrication Fundamentals

      5. Digital Electronics

      6. CMOS VLSI Designs

      7. ASIC Design Flow

      8. Basic of HDL

      9. Static Timing Analysis

      10. Low Power Designs

      11. Semiconductor Modeling

       

       

      - ASIC Design

    • #573
      Vinh P. Nguyen
      Moderator
      • Topics : 3
      • Contributions : 10
      • Senior Contributor
      • ★★★
      Up
      2
      Down
      ::

      * Phần 2: Dành cho các bạn kỹ sư mới ra trường.

      Phần nhiều các bạn kỹ sư mới sẽ được đào tạo để thích ứng với qui trình thiết kế của các công ty trong vài tháng đầu tiên cho đến nhiều nhất là 3 năm. Dưới đây tôi tạm liệt kê một số phần kiến thức cần có trong qui trình đào tạo các bạn kỹ sư trẻ của một số công ty tại Việt Nam và Mỹ.

      1. ASIC Design Flow: From Idea to Silicon.

      2. Modern Physical Design Flow

        • Constraint Development
        • RTL2Netlist Synthesis
        • Floor-planning
        • Power Planning and Power Synthesis
        • Placement
        • Clock Tree Synthesis
        • Routing
        • Timing Analysis, Timing Closure and Signoff
        • Physical Verification (PV or PDV)
        • EMIR Signoff
        • ESD Signoff & Latch-up Signoff
        • Formal Verification, LEC Signoff
        • Chip finishing

      3. Hierarchical Design Flow and Chip integration

      4. Technology and Design guideline from Foundry.

      5. Fabrication Outliners: How your chip been made?

      6. EDA tool user guide and manual.

      7. Basic Concepts:

        • Design For Test
        • Design For Manufacturing
        • Logic Design: Spec vs Architecture
        • Design Verification and Simulation
        • Corporation with Package Design
        • Board Driven IC Design and System level Design
        • Post-Silicon verifications

       

      - ASIC Design

Viewing 1 reply thread
  • You must be logged in to reply to this topic.

Cộng Đồng Vi Mạch

You can find many knowledge and topic relating to semiconductor from front-end design, back-end design, and also software development.

台灣使蒂諾斯購買

失眠困擾著很多人,長期失眠會對身體造成危害,官網https://www.stilnoxs.com/,線上訂購使蒂諾斯,隱私包裝快速出貨。

失眠多夢可以服用使蒂諾斯安眠藥,線上訂購https://www.stilnoxs.com/product/16,線上訂購無需處分,24h快速出貨。